DEALER LOCATOR  |  ZIP
14beae48a6ad63dab68d0f322637bd26

Boat Details:
1) Bow panel incorporating troll motor plug, trim switch, and 12V outlet.
2) Fishing seat base.
3) Removable cooler seat with cushions.
4) Fishing seats double as transom seats for riding.
5) Huge live/release well with high speed pump pickup.
6) Cooler seat with locking flip flop backrest.

186BR

Boat Description:
A huge front deck, rear deck, and an eight foot beam make this bay a very versatile fishing boat, and it is still small and light enough for most tow vehicles. The 40 gallon live well is larger than most offshore boats and the 19 degree dead rise gives it a ride to take you there occasionally.
DOWNLOAD:     MANUAL  |   PERFOMANCE REPORT
  • One casting seat with base.
  • 72 Qt. cooler seat with cushion.
  • Generous bow casting deck.
  • Pull up cleats.
  • Black accents.
  • Courtesy lights.
  • Folding stern light.
  • Molded non-skid inner liner.
  • 2 console mounted rod racks.
  • 2 SS trolling rod holders.
  • Stainless Steel Hardware.
  • 12 volt power outlet on dash.
  • Large storage compartment in bow.
  • Electric horn.
  • Storage under console.
  • Compass.
  • Bow and rear casting decks.
  • Tinted windshield with SS grab rail
  • Storage compartment in rear.
  • Flip flop cooler seat with back rest.
  • Polished SS steering wheel with anti feedback mechanical steering.
  • Molded Anchor Storage with Ancohor
  • Engine builder matched analog gauge package.
  • Rear Storage for Battery and Accessories
  • Molded Swim Platform with Stainless Steel Ladder
  • Bilge Pump with Automatic Switch
  • Built-In Fuel Tank
  • Foam Injected Fiberglass Stringer System
  • High Speed Pick-Up Livewell
  • Self-Bailing Cockpit
  • Ten (10) Year Hull Warranty
  • No Wood-No Rot Construction
  STANDARD METRIC
Length: 18'6" 5.64
Beam: 8' 2.44 m
Transom: 25" .66 m
Approx. Weight: 1650 lbs 748 kg
Fuel Capacity: 40 gallons 151 liters
Max HP: 150 hp 112 kw
Recommended HP: 115-150hp  
Dead Rise: 19 degrees
Draft: 12" .28 m
  • Twin Captain's chairs.
  • Casting seat base only.
  • Casting seat with base and pole.
  • Bow cushion.
  • Stainless steel bimini top and boot.
  • Aluminum bimini top and boot.
  • Additional pull up cleat or cleats.
  • Delete molded swim platform.
  • Delete rail or rails.
  • Yamaha Command Link 2 gauge package.
  • T-top spray shield.
  • T-top gull wings.
  • Captain's chair covers, set of 2.
  • Yamaha multi function tachometer and speedometer.
  • Leaning post cover.
  • Flip flop cooler cover.
  • T-top mooring cover.
  • Sunbrella console cover.
  • Sunbrella mooring cover.
  • Standard mooring cover.
  • Shipping cover.
  • Recirculating live well aft.
  • Trim tabs.
  • Pull up fender holders, set of 4.
  • Sea Star hydraulic tilt steering.
  • Dual battery switch and wiring.
  • Sea Star hydraulic steering.
  • Push pole brackets.
  • Bow lifting eye.
  • Push pole.
  • Poling platform.
  • Quick release bracket for Minn Kota Riptide troll motor.
  • Troll package; Minn Kota Riptide 24V hand control 80 lb thrust with wiring and dual charger.
  • Troll Package; Minn Kota 24V Riptide 70lb thrust hand control with wiring and dual charger.
  • Troll package; Minn Kota Riptide 12V 55 lb thrust hand control with wiring and charger.
  • Stereo and MP3 port with 4 speakers.
  • T-top deluxe with radio box, spreader lights, and rocket launchers.
  • Leaning post exchange for cooler seat w/o cooler underneath.
  • 72 qt cooler for leaning post.
  • T-top cargo netting.
  • Side grab rails.
  • Deluxe leaning post with back rest and rod holders.
  • 94qt cooler for deluxe leaning post.